ELECTRODO BOEHLER FOX CEL 85 E8010-P1 4MM X 9.5KG

Shipping for zipcode:
Shipping Methods

Nickel-alloyed cellulosic electrode for high-strength pipelines

Böhler Fox Cel 85 (AWS E8010-P1) adds 1% nickel to the cellulosic coating for a stronger, tougher deposit. It is the choice for hot pass, fill and cap on X56 to X70 pipe. In 4.00 mm it excels at hot pass, fill and cap, with a higher deposition rate.

Key advantages

  • 1% Ni alloyed: higher deposit strength and toughness.
  • X56 to X70 pipe: in vertical-down.
  • Low-temperature toughness: 70 J Charpy impact at -40 °C.
  • Sour gas service: HIC tested per NACE TM-02-84; SSC data available.
  • Certified quality: TÜV, ABS approvals and CE marking.

Applications

  • Large-diameter, high-strength gas and oil pipelines.
  • API 5L X56, X60, X65 and X70 steels.
  • Pipe steels L415NB to L485NB and L415MB to L485MB.
  • Sour gas service.

Technical specifications

ClassificationAWS A5.5: E8010-P1 · EN ISO 2560-A: E 46 4 1Ni C 2 5
ApprovalsTÜV · ABS · CE
Diameter4.00 mm
Packaging9.5 kg pack
CurrentDC (+) · 120 to 180 A
CoatingCellulosic
Tensile strength580 MPa (yield 490 MPa)
Elongation23%
Charpy impact70 J at -40 °C

📄 Download technical data sheet (PDF)

Technician's tip: Böhler does not allow re-drying cellulosic electrodes: the coating must keep its natural moisture to deliver its signature penetration. Keep them in their original packaging, protected from rain and excessive heat.

Why buy from Soldaduras?

With over 50 years of experience, we are specialized distributors of welding, abrasive and polishing supplies. Every purchase comes with real technical support.

✔ Nationwide shipping
✔ Local delivery in the AMBA area
✔ Pickup at 338 Gral. Enrique Mosconi Ave., Lomas del Mirador
✔ Open Monday to Friday, 8 AM to 4 PM

Not sure which diameter or amperage suits your job? Ask us before you buy.

Ask an advisor on WhatsApp