$292.95 USD
Extra-low hydrogen high-strength electrode
ESAB OK 75.60 (AWS A5.5: E9018-M) is an extra-low hydrogen, nickel-alloyed basic electrode for high-strength, fine-grain steels with good low-temperature toughness. In 4.00 mm it is for medium sections and higher deposition rates.
Key advantages
- High strength: 650 MPa tensile.
- Extra-low hydrogen to prevent cracking.
- Tough: 35 - 60 J at -51 °C.
- DC (+) or AC.
Applications
- High-strength and fine-grain steels.
- Structures, cranes and heavy equipment.
- Applications requiring low-temperature toughness.
Technical specifications
| Classification | AWS A5.5: E9018-M |
| Diameter | 4.00 mm |
| Packaging | 20 kg can |
| Recommended current | 130 - 200 A |
| Coating | Basic, extra-low hydrogen |
| Current | DC (+) / AC |
| Tensile strength | 650 MPa |
| Charpy impact | 35 - 60 J at -51 °C |
📄 Download technical data sheet (PDF)
Technician's tip: like any low-hydrogen electrode, keep it dry. If the pack was left open, re-dry it per the manufacturer's data sheet and keep it in a holding oven until welding. Follow the preheat and post-weld treatment required by the base metal.
Why buy from Soldaduras?
With over 50 years of experience, we are specialized distributors of welding, abrasive and polishing supplies. Every purchase comes with real technical support.
✔ Nationwide shipping
✔ Local delivery in the AMBA area
✔ Pickup at 338 Gral. Enrique Mosconi Ave., Lomas del Mirador
✔ Open Monday to Friday, 8 AM to 4 PM
Not sure about the right diameter or amperage for your job? Ask us before you buy.



