$1973.53 USD
Nickel-chromium-molybdenum TIG rod for Inconel® 625 type alloys
RMB ERNiCrMo-3 (AWS A5.14) is a niobium-bearing nickel-chromium-molybdenum filler rod for TIG welding of high-nickel alloys such as Inconel® 625 and similar. It offers very good resistance to corrosion, pitting and stress corrosion cracking. In 2.40 mm, the most popular size, it performs on root and fill passes in medium sections.
Key advantages
- High strength: 760 MPa minimum tensile strength per AWS A5.14.
- Corrosion resistant: pitting and stress corrosion.
- Low-temperature toughness: suitable down to cryogenic service.
- Dissimilar joints: nickel alloys to steels.
- Goes further: 10 kg pack.
Applications
- Inconel® 625, Inconel® 601 and Alloy 800 type alloys.
- Dissimilar joints with stainless or carbon steels.
- Corrosion-resistant overlays on steel.
- Chemical, petrochemical and marine industries.
Technical specifications
| Classification | AWS A5.14: ERNiCrMo-3 · EN ISO 18274: S Ni 6625 |
| Diameter | 2.40 mm |
| Packaging | 10 kg pack |
| Process | TIG (GTAW) |
| Current | DC (-) |
| Shielding gas | 100% Argon |
| Composition (AWS) | Ni ≥ 58.0% · Cr 20.0 - 23.0% · Mo 8.0 - 10.0% · Nb+Ta 3.15 - 4.15% |
| Tensile strength | ≥ 760 MPa (AWS minimum) |
📄 Download technical data sheet (PDF)
Technician's tip: thoroughly clean the joint area (rust, oil and dirt) and always keep the hot end of the rod inside the gas shield, so it does not oxidize and contaminate the weld.
Why buy from Soldaduras?
With over 50 years of experience, we are specialized distributors of welding, abrasive and polishing supplies. Every purchase comes with real technical support.
✔ Nationwide shipping
✔ Local delivery in the AMBA area
✔ Pickup at 338 Gral. Enrique Mosconi Ave., Lomas del Mirador
✔ Open Monday to Friday, 8 AM to 4 PM
Not sure which diameter or amperage suits your job? Ask us before you buy.



