$205.62 USD
Low-silicon cored wire for parts to be galvanized
ESAB OK Tubrod 70LSi (AWS E70T-G) is a very low-silicon cored wire for carbon steels that will be hot-dip galvanized, giving an even zinc coating over the weld too. This item is 1.20 mm in diameter.
Key advantages
- Silicon < 0.05% in the deposit.
- Even galvanizing over the weld.
- Good properties: 520 MPa tensile.
- Trusted brand: ESAB.
Applications
- Structures and parts to be hot-dip galvanized.
- Railings, towers, poles and fittings.
- General fabrication in flat and horizontal positions.
Technical specifications
| Classification | AWS A5.20: E70T-G |
| Diameter | 1.20 mm |
| Packaging | 16 kg spool |
| Recommended current | 150 - 330 A |
| Shielding gas | Ar + 20-25% CO2 |
| Positions | Flat and horizontal |
| Tensile strength | 520 MPa (yield 460 MPa) |
| Charpy impact | 49 J at 0 °C |
📄 Download technical data sheet (PDF)
Technician's tip: use a drag technique with a 15 to 25 mm stick-out; use knurled or U-groove drive rolls so the cored wire is not crushed. Remove slag thoroughly between passes.
Why buy from Soldaduras?
With over 50 years of experience, we are specialized distributors of welding, abrasive and polishing supplies. Every purchase comes with real technical support.
✔ Nationwide shipping
✔ Local delivery in the AMBA area
✔ Pickup at 338 Gral. Enrique Mosconi Ave., Lomas del Mirador
✔ Open Monday to Friday, 8 AM to 4 PM
Not sure about the right diameter or parameters for your job? Ask us before you buy.



