VARILLA AGROTUNG WC 60 Ø 5.00 MM X KG

Shipping for zipcode:
Shipping Methods

Tungsten-carbide tubular rod for extreme abrasion

Cuarepoti AgroTung WC60 rod deposits a metal with a high content of tungsten and chromium carbides: maximum abrasion resistance, with moderate impact resistance even at high temperatures. Slag-free deposit with over 95 % recovery. It is applied by arc, TIG or torch; with a torch dilution is nil and a single pass already gives high abrasion resistance.

Key advantages

  • 60/65 HRC: maximum abrasion resistance.
  • Hot hardness: good up to 900 °C.
  • Low dilution: tubular: lower amperage than a solid rod.
  • Three processes: arc (SMAW), TIG or torch.

Applications

  • Parts and equipment subject to extreme abrasion.
  • Equipment where downtime or repair costs justify maximum protection.

Technical specifications

StandardAWS A5.13 · AWS A5.21 · DIN 8555
PackagingPer kg
Diameter5.00 mm
Hardness60/65 HRC
Number of passes2 maximum
Arc (SMAW)DC (+) · 120-150 A
Torch (OAW)Tip 5 - 6 · 3X-4X flame
TIG (GTAW)140-180 A, DCEN, 100 % argon
Rod length500 mm
MachiningWith abrasives; cannot be torch-cut
Identification colorBrown

📄 Download technical data sheet (PDF)

Technician's tip: dry the rods for 1 hour at 100 °C and remove previous hardfacing. With arc: DC (+), rod at 75-90°, held 15-20 cm from the tip, beads overlapped 50-75 % and no excess amperage; two passes give maximum hardness. On manganese steels do not exceed 260 °C. Cool slowly in dry sand, vermiculite or lime.

Why buy from Soldaduras?

With over 50 years of experience, we are specialized distributors of welding, abrasive and polishing supplies. Every purchase comes with real technical support.

✔ Nationwide shipping
✔ Local delivery in the AMBA area
✔ Pickup at 338 Gral. Enrique Mosconi Ave., Lomas del Mirador
✔ Open Monday to Friday, 8 AM to 4 PM

Not sure about the product or the parameters for your job? Ask us before you buy.

Ask an advisor on WhatsApp