$1466.39 USD
Nickel rod for Nickel 200/201 and dissimilar joints
FLyWeld ER Ni-1 rod Ø 2.4 mm is a nickel TIG rod (93% min.) with titanium to control porosity. It is used to weld Nickel 200 and 201, to surface steels and to join nickel to carbon and stainless steels. Its deposit resists caustics, alkalis and many chemicals.
Key advantages
- 93% min. nickel: with titanium against porosity.
- Caustic resistant: and alkali resistant.
- Dissimilar joints: nickel to steel.
- Surfacing: of steels.
Applications
- Chemical and food industries.
- Caustic soda and alkali equipment.
- Nickel-to-steel joints and steel surfacing.
Technical specifications
| Standard | AWS A5.14 ERNi-1 · UNS N02061 |
| Packaging | 5 kg box |
| Diameter | 2.4 mm |
| Base composition | Ni+Co 93 min. · Ti 2.0-3.5 (%) |
| Reference tensile strength | 414 MPa min. · 20% elongation |
| Process | TIG · DC electrode negative · 100% argon |
📄 Download technical data sheet (PDF)
Technician's tip: clean the area thoroughly (rust, grease, paint and crayon or marker marks), use pure argon and always keep the hot end of the rod inside the gas shield. Nickel alloys are less fluid than steel: use low heat input and lay narrow beads.
Why buy from Soldaduras?
With over 50 years of experience, we are specialized distributors of welding, abrasive and polishing supplies. Every purchase comes with real technical support.
✔ Nationwide shipping
✔ Local delivery in the AMBA area
✔ Pickup at 338 Gral. Enrique Mosconi Ave., Lomas del Mirador
✔ Open Monday to Friday, 8 AM to 4 PM
Not sure about the product or the parameters for your job? Ask us before you buy.



